Purification technology:

• reduction of sediments;
• reduction of chlorine and organic matter;
• water softening, removal of up to 99.8% of all impurities with the reverse osmosis membrane or removal of microbiological contaminants with ultrafiltration membrane;
• adjustment of water pH and remineralization;
• improvement of taste and odor;
• UV disinfection.

Vending device management system

VDMS — means full online control of your system feature. It helps you to track:

Components:

1. Metal housing
2. Assembled water purification system
3. Controller with integrated GSM/GPRS module
4. Pouring terminal
5. Antiscalant dosing unit
6. Discharge to sewers under pressure
   

Options:

• Unattended Payment Terminal PAX IM10
• Coin acceptor*
• Bill acceptor*
• Remineralization unit
• Multifunctional monitor
• Thermostabilization and housing heating
• Individual branding

*available firmware: €; $; ₸; ₽; BGN; BYN

Technical specifications

• Nominal capacity for purified water* — 250 L/h
• Pouring flow rate* — 4-5 L/min
• Range of volumes — 1-19 L
• Inlet water pressure (recommended) — 2..6 bar

*T = 20 °C

Feed water requirements*

• Hardness — ≤ 20**/10*** meq/L
• TDS — ≤ 2000**/1000*** mg/L
• Residual chlorine — ≤ 0.1 mg/L
• Iron — ≤ 0.1 mg/L
• Manganese — ≤ 0.05 mg/L
• Feed water temperature — 10..20 °C

* The rest of the parameters must comply with local drinking water regulations

** the requirements are relevant for machines equipped with a RO membrane

*** the requirements are relevant for machines equipped with a UF membrane

Utility requirements

• Mains voltage/frequency — 230/50 V/Hz
• Total power consumption — 1000 W
• Water supply connection — ½ inch
• Drain water connection — ½, 1¼ inch