Ecosoft sea water MO10000BI6 4" reverse osmosis system

Produktinformationen

The Ecosoft sea water MO10000BI6 reverse osmosis system with a 4-inch pore diameter will purify water for households in coastal areas and islands. Seawater is transformed into safe, drinking-quality water by our advanced chemical-free reverse osmosis system equipped with FilmTec membranes.

Smart engineering, single-phase power, and theEcosoft OC6000 with Econnect provide simple operation and reliable remote monitoring.

Technische Informationen

Parameter
Spezifikation
Rated capacity
up to 400 L/h
Rated capacity
up to 10000 L/d
Recovery
20-30 %
Inlet water TDS
40 000 ppm
Membranes pcs/type
3/40 x 40
Inlet water pressure
2…4 bar
Operating pressure
35…45 bar
Maximum pressure
55 bar
Feed flow for service
1200…1400 L/h
Feed flow for forward flush
forward flush with permeate
Water consumption for forward flush
80 L
Inlet water temperature, °C
5…30
Rated voltage
1 x 220–230 V
Mains frequency
50 Hz
Rated power
2.2 kw
Operating parameter specifications:*
description
Permeate flow
5-7 lpm
Concentrate flow
16-25 lpm
Recycle flow
absent
Operating pressure
35…45 bar

*The data are indicated under the operating conditions of the system at feed water temperature of 25 °C, a salinity of 35 000 ppm, DUPONT FilmTec™ SW30-4040 membrane element, the unit efficiency is 20%. The performance of your system may be different from these values depending on these factors, the chemical composition of the water and other factors.

Parameter
Pump Single-phase CAT high pressure pump AISI 316
Membrane vessel 1000 psi - 3 pcs
Electrical panel and controller Ecosoft OC6000
Online access to the RO machine Ecosoft OC6000
Languages of menu controller – Yes
Conductivity cell permeate EN, FR, UA, CZ
Conductivity cell inlet water – Yes
Sediment prefilter – No
Sediment filter – No
Frame Stainless steel frame – 1 pcs
Inlet solenoid valves – Yes (motorized ball valve)
Forward flush solenoid valves – Yes (motorized ball valve)
Float switch – Yes
Pressure switch after sediment filter – Yes
Pressure switch on permeate line – Yes
Permeate rotameter – No (electric meter)
Consentrate rotameter – 4-20 lpm adjustable
Permeate recycle – No
Pressure gauge inlet before sediment filter – No
Pressure gauge after sediment filter – No
Operating pressure gauge – Yes
Connection feed water – G 1"
Connection permeate – G 1/2"
Connection concentrate G 1/2"
Connection ports for dosing pump – No
Connection ports for permeate flush kit – On board
Connection ports for raw water blending kit – No

Parameter
Spezifikation
Max. inlet water TDS (Total dissolved salts)
40 000 ppm
Hardness, ppm CaCO3*
150 ppm
Hardness, ppm CaCO3**
1500 ppm
Silica
20 mg/l SiO₂
Residual chlorine
0,1 mg/l
Chemical oxygen Demand
5 mg O2
Iron
0,1 mg/l
Manganese
0,05 mg/l
Chlorides***
20000 mg/l

*without dosing antiscalant

**with dosing antiscalant

*** If the chloride content exceeds 500 mg/L, it may lead to a reduced service life of the pump due to corrosion

Lokaler Support

Kontakt
Brauchst du Unterstützung durch einen lokalen Experten?

Unsere Partner unterstützen dich gern mit ihrer Expertise und sorgen für eine professionelle Installation und einfache Wartung.

Hinterlasse einfach eine kurze Nachricht, und wir verbinden dich mit einem unserer lokalen Partner!

Dies hilft uns, schnell mit Ihnen in Kontakt zu treten
Postleitzahl
Ich akzeptiere die Datenschutzerklärung
CAPTCHA
Diese Frage dient dazu, zu überprüfen, ob Sie ein menschlicher Besucher sind, und um automatisierte Spam-Einreichungen zu verhindern.