Ecosoft sea water MO10000BI6 4" reverse osmosis system

Informazioni sul prodotto

The Ecosoft sea water MO10000BI6 reverse osmosis system with a 4-inch pore diameter will purify water for households in coastal areas and islands. Seawater is transformed into safe, drinking-quality water by our advanced chemical-free reverse osmosis system equipped with FilmTec membranes.

Smart engineering, single-phase power, and theEcosoft OC6000 with Econnect provide simple operation and reliable remote monitoring.

Informazioni tecniche

Parametri
Specifica
Rated capacity
up to 400 L/h
Rated capacity
up to 10000 L/d
Recovery
20-30 %
Inlet water TDS
40 000 ppm
Membranes pcs/type
3/40 x 40
Inlet water pressure
2…4 bar
Operating pressure
35…45 bar
Maximum pressure
55 bar
Feed flow for service
1200…1400 L/h
Feed flow for forward flush
forward flush with permeate
Water consumption for forward flush
80 L
Inlet water temperature, °C
5…30
Rated voltage
1 x 220–230 V
Mains frequency
50 Hz
Rated power
2.2 kw
Operating parameter specifications:*
description
Permeate flow
5-7 lpm
Concentrate flow
16-25 lpm
Recycle flow
absent
Operating pressure
35…45 bar

*The data are indicated under the operating conditions of the system at feed water temperature of 25 °C, a salinity of 35 000 ppm, DUPONT FilmTec™ SW30-4040 membrane element, the unit efficiency is 20%. The performance of your system may be different from these values depending on these factors, the chemical composition of the water and other factors.

Parametri
Pump Single-phase CAT high pressure pump AISI 316
Membrane vessel 1000 psi - 3 pcs
Electrical panel and controller Ecosoft OC6000
Online access to the RO machine Ecosoft OC6000
Languages of menu controller – Yes
Conductivity cell permeate EN, FR, UA, CZ
Conductivity cell inlet water – Yes
Sediment prefilter – No
Sediment filter – No
Frame Stainless steel frame – 1 pcs
Inlet solenoid valves – Yes (motorized ball valve)
Forward flush solenoid valves – Yes (motorized ball valve)
Float switch – Yes
Pressure switch after sediment filter – Yes
Pressure switch on permeate line – Yes
Permeate rotameter – No (electric meter)
Consentrate rotameter – 4-20 lpm adjustable
Permeate recycle – No
Pressure gauge inlet before sediment filter – No
Pressure gauge after sediment filter – No
Operating pressure gauge – Yes
Connection feed water – G 1"
Connection permeate – G 1/2"
Connection concentrate G 1/2"
Connection ports for dosing pump – No
Connection ports for permeate flush kit – On board
Connection ports for raw water blending kit – No

Parametri
Specifica
Max. inlet water TDS (Total dissolved salts)
40 000 ppm
Hardness, ppm CaCO3*
150 ppm
Hardness, ppm CaCO3**
1500 ppm
Silica
20 mg/l SiO₂
Residual chlorine
0,1 mg/l
Chemical oxygen Demand
5 mg O2
Iron
0,1 mg/l
Manganese
0,05 mg/l
Chlorides***
20000 mg/l

*without dosing antiscalant

**with dosing antiscalant

*** If the chloride content exceeds 500 mg/L, it may lead to a reduced service life of the pump due to corrosion

Assistenza locale

Contatti
Hai bisogno del supporto di un esperto locale?

I nostri partner sono felici di supportarti con la loro esperienza, garantendo una installazione professionale e una manutenzione semplice.

Lasciaci un breve messaggio e ti metteremo in contatto con uno dei nostri partner locali!

Questo ci aiuterà a metterci rapidamente in contatto con te
Codice postale
Accetto il Privacy dei dati
CAPTCHA
Questa domanda serve per verificare se sei un visitatore umano e per prevenire l'invio automatico di spam.