Product information
Ecosoft E-360 ultraviolet water sterilizer is designed for small apartments with one bathroom and households of 1–2 people. With a maximum flow rate of up to 1.3 m³/h, it ensures stable UV disinfection for daily residential water use. The system inactivates up to 99.9% of bacteria and viruses at the DNA level, delivering biologically safe water at every tap.
The sterilizer provides 100% physical UV treatment without chlorine or chemical additives, preserving the natural taste and odor of water. A high-purity quartz sleeve supports efficient UV transmission, while the stainless steel housing ensures durability and long-term reliability. With up to 9,000 hours of lamp operation, the E-360 offers consistent protection with minimal maintenance.
Technical information
The UV lamp should be replaced once a year to ensure effective disinfection.
Components should be cleaned periodically to remove mechanical impurities and scale, helping maintain stable and reliable performance.
Replacements
-
E360UV£ 42.50 excl. VAT£ 51.00 incl. VAT
FAQ
-
Why should I replace the UV lamp every year if it still glows blue?
The blue light is only a visual indicator that the lamp is on. Over time, the UV-C intensity that inactivates bacteria and viruses gradually decreases. After about 9,000 hours of operation (approximately one year), the lamp may still appear bright, but its disinfection performance is no longer sufficient for reliable protection.
-
Should I unplug the UV system when water is not in use?
No, we do not recommend switching the system on and off frequently. This can reduce the service life of the UV lamp and ballast. In addition, the lamp requires a warm-up period to reach full intensity, so immediate water use after restart may result in insufficient disinfection.
-
Can a UV sterilizer replace boiling water?
Yes. UV disinfection effectively neutralizes bacteria and viruses and is more efficient than boiling for microbiological protection. At the same time, it preserves the natural taste of water and retains beneficial minerals that can be affected by heat treatment.
-
Why is the water sometimes warm when I first open the tap?
If the system has not been used for several hours, the water remains inside the chamber and may absorb heat from the operating UV lamp. This is normal. Simply let the water run for a few seconds until it returns to its usual temperature.
-
Will the UV lamp remove sand, chlorine, or iron from my water?
No. A UV sterilizer is designed exclusively for biological disinfection.
-
Does UV sterilization work in cloudy or turbid water?
No, it is significantly less effective in turbid or cloudy water.
For UV light to neutralize microorganisms, it must physically reach them. If the water contains suspended particles such as sand, silt, or rust, these particles can act as shields. Bacteria may “hide” behind them and pass through the chamber without sufficient UV exposure. This is known as the shadowing effect.
For reliable biological protection, proper mechanical pre-filtration is required before the UV sterilizer.
Local support
Our partners are happy to support you with their expertise, ensuring a Professional installation and Easy Maintenance.
Just leave a short note and we will connect you with one of our local partners!
