Industrial 8″ reverse osmosis 450 L/h

An industrial reverse osmosis system is a powerful water treatment machine intended for large-scale purification. In the Ecosoft online shop, you can buy units at an affordable price. Here, it is easy to pick compatible consumables when required. There are membrane elements, pre-filters, post-filters, etc.

A 8″ reverse osmosis filter is equipped with a semipermeable membrane, which measures about 8 inches in diameter. This size is compatible with large filtration systems used in the industrial sector for removing over 99% of organic and inorganic pollutants from water when it is forced under pressure through an RO membrane, pre-filters, and post-filters. The solution provides the highest level of water purification compared to other methods due to an RO membrane that consists of three layers made of polyester, polysulfone, and polyamide.

Such an advanced solution is required in the food and beverage, biotechnology, pharmaceutical, chemical, electronics, semiconductor, and other industries, where there are strict requirements for water quality. Benefits of RO systems include both high water purification and the possibility of reusing it, balancing the environmental and economic needs of the enterprise. Also, such filtration units are used for the desalination of seawater for municipal water supply and industrial needs.

The operating principle of a reverse osmosis system is based on the use of a semipermeable membrane with very tiny pores that let only water molecules pass through, preventing over 99% of contaminants. To force the water, pressure is applied. In addition to the membrane elements, the system typically includes tanks with pre-filters and intermediate filters to remove large particles, a carbon filter, a UV steriliser, and a water softener. Together, filtration stages added to an RO membrane provide highly purified, fresh, tasty drinking water not only without salts, solid-phase substances, and minerals but even without bacteria and viruses mixed in. The contaminants are left in wastewater, which is sent to the drain.

An industrial drinking water osmosis system may include:

• Sediment (with a polypropylene cartridge) and carbon pretreatment filters. They remove suspended solids, chlorine, and turbidity in water to protect the membrane and extend its service life.
• High-pressure pump. It is needed to force the water through a membrane when the water supply pressure is not sufficient.
• Dosing pump. It is used to dose RO chemicals.
• Blending line. It mixes raw water.
• Water softener. It removes hardness, which causes limestone buildup in the equipment that reduces its service life.
• Mineraliser. It remineralises the purified water, adding calcium and magnesium beneficial for health.

There are also sensors, manometers, thermomanometers, and indicators on the electrical control panel, which allow a user to monitor parameters for an early reveal of the time to replace cartridges and adjust the system to water.

To pick industrial 8″ reverse osmosis systems, you should comprehend the content of the water to be treated and your expectations for the target water quality. Various industries have unique requirements. When the unit is chosen for a food industry, the water can contain less than 100 ppm of TDS, while lots of pharmaceutical manufacturers have to use water with less than 2 ppm total dissolved solids.

Then, productivity should be focused on. The flow rate can be 2 m³/h (can be compared with a commercial water filter) and 48 m³/h, which impacts the size and the cost of the unit. The more productive the system, the more membranes it has. Still, there are industrial solutions with 2 membranes only and with a significant capacity of 20,000 litres per day.

Also, it makes sense to consider the availability of RO consumables, energy savings, and the wastewater. Mostly, models recover 75% of the wastewater for utility or other usage. And you should ensure that the unit’s operating pressure complies with the water pressure in the water supply system.

When you order Ecosoft industrial water treatment osmosis systems, you get a number of benefits, including our advanced, patented technologies, brilliant filtration performance, and reduced energy consumption. In our catalogue, there is a versatile assortment that meets the needs of various industrial sectors. All our products are manufactured at the ISO 9001-certified factory. Moreover, the tailored offer is available. To find out how much such customised systems cost, contact us.