Product information
Ecosoft Inox IoT MO24000 4″ reverse osmosis system is the most popular model for small-scale production within the Ecosoft Inox IoT series. The system delivers up to 24,000 liters of purified water per day. The stainless steel frame and fasteners ensure long service life, reliability, and a modern, professional appearance.
Pre-designed and convenient options for permeate flushing and blending assembly enable the system to handle any water treatment task, even with complex feed water. The robust design and high-quality components ensure continuous 24/7 operation. Its open-frame construction allows quick and easy maintenance access, while the Ecosoft OC6000 controller provides full customization to meet specific process requirements and operating conditions.
Permeate flushing extends the service life of membrane elements by up to 30% and significantly reduces the load on pre-filters. The blending assembly allows flexible mixing from any point within the purification system or even from an alternative water source.
A well-designed structure with a built-in power reserve makes this model an optimal solution for hotels, greenhouses, and livestock complexes. The MO24000TI6 is also a reliable choice for medium-sized businesses, including breweries, household chemicals, cosmetics, and car care product manufacturers. With the OC6000 controller, you stay in full control of your water quality at all times.
Reverse Osmosis Systems
Technical information
* The data are indicated under the operating conditions of the system at feed water temperature of 25 °C, a salinity of 1,500 ppm, XLE PRO-4040 membrane element, the unit efficiency is 75%. The performance of your system may be different from these values depending on these factors, the chemical composition of the water and other factors. Use the RO calculator for your system.
* If the chloride content exceeds 2,000 mg/L, it may lead to a reduced service life of the pump due to corrosion. For detailed advice or water quality assessment, contact us at ecosoft@support.
To ensure maximum efficiency of the Ecosoft reverse osmosis system, regular replacement of filter elements is required. Proper maintenance guarantees high water quality and extends the service life of your system.
Cartridge replacement schedule:
- Ecosoft PP melt-blown sediment filter, 4.5″ × 20″, 5 µm – replace every 4 months, or if the pressure drop reaches 0.5 bar
- Membrane element – replace or clean every 6 months if productivity decreases by more than 15–20%, water quality worsens by 15–20%, or pressure drop increases by 15–20%
You can replace cartridges and membrane elements yourself, but for best results we recommend contacting an authorized service center.
If you decide to carry out the replacement yourself, follow the instructions below:
⚠️ Use sterile rubber gloves when handling membrane elements
⚠️ If high microbiological purity is required, disinfect the reverse osmosis system and the permeate tank before installing the membrane
Membrane holder cap
1 – Screws, 2 – Locking half-rings, 3 – End cap, 4 – Sealing ring, 5 – Sealing ring for the end cap.
Remove the membrane element(s) from the factory packaging. To replace the old element with a new one, disconnect the pipelines and remove the membrane holder(s) from the frame.
⚠️ Pay special attention to the sealing ring of the end cap (5). If the seal is missing, permeate and concentrate streams may mix.
After removing the end cap, install the membrane element in the direction of the arrow marked on the membrane holder (from the inlet water side). The membrane element must be inserted into the holder with its sealing ring aligned with the inlet connection of the holder head.
After installation, secure the holder head with screws and locking elements to the holder body, then reconnect the pipelines for feed water, concentrate discharge, and permeate outlet on the membrane holder. Fix the membrane holder to the reverse osmosis system frame.
During the first system startup, the initial portion of permeate must be discharged to the sewer, with a minimum discharge time of 15 minutes.
💡 When installing the membrane, pay attention to the direction of the arrow on the membrane holder.
💡 If necessary, use glycerin as a lubricant.
Consumables
-
XLE4040£ 608.33 excl. VAT£ 730.00 incl. VAT
-
LCLE4040£ 710.00 excl. VAT£ 852.00 incl. VAT
-
BW4040UES£ 535.83 excl. VAT£ 643.00 incl. VAT
-
BW4040ES£ 499.17 excl. VAT£ 599.00 incl. VAT
-
EXLP4040£ 260.00 excl. VAT£ 312.00 incl. VAT
-
ELP4040£ 285.83 excl. VAT£ 343.00 incl. VAT
-
CPV45205ECO£ 23.33 excl. VAT£ 28.00 incl. VAT
FAQ
-
How can I remotely monitor the system operation?
The Ecosoft Inox IoT MO6500 is equipped with the OC6000 controller, which enables remote monitoring of system operation. All operating data is securely transmitted to the Ecosoft cloud platform, where you can access your online monitoring account at any time. This allows you to check system performance remotely without being physically present on site.
-
What information is available in the remote monitoring account?
Your remote account provides a clear overview of the system’s current status and key operating parameters. You can monitor:
- the system operating mode (operation, standby, or emergency)
- current flow rate and inlet water temperature
- TDS of feed water and permeate
- daily purified water production
This information helps you track system performance, quickly identify irregularities, and plan maintenance more efficiently.
-
What water quality can I expect after filtration?
To determine the quality of water after the system, you can use software to calculate the operating parameters and expected purity.
Projection tools like Wave from DuPont and QPlus from LG allow for detailed modelling. You can also use the Ecosoft RO calculator to get an approximate estimate based on basic input data.
If you would like support with this, send your feed water parameters to [email protected] — we’ll be happy to help.
-
How can I add my system to the remote monitoring account?
If you are installing your first system with the OC6000 controller, you need to request access to the remote monitoring platform.
Please contact us via the contact form or by email at [email protected] and include the following information:
- your email address
- phone number
- company name
- first and last name
Once your account is created, our team will provide you with access details. You can then add your system to the account by entering the system model, serial number, and IMEI. The system will appear automatically in your account.
The system model and serial number are indicated on the system nameplate, while the IMEI can be found in the controller menu.
-
What type of connection does the OC6000 controller use?
The OC6000 controller currently operates using a 2G mobile connection. If 2G networks are not available in your country, remote monitoring via the cloud platform will not be possible.
The OC6000 controller does not support Ethernet, Wi-Fi, or Bluetooth data transmission.
A new controller, OC6100, is expected in 2026. It will support 4G connectivity and provide the option to connect via wired internet.
-
How can I connect the OС6000 system to BMS (Building Management System) or Smart Home?
At the moment, the OC6000 controller does not support integration with Building Management Systems (BMS) or Smart Home platforms.
An updated controller, OC6100, is expected in 2026. It will offer expanded connectivity options and is planned to support integration with BMS and Smart Home systems.
-
What kind of pre-treatment is required before the system?
If you use tap water as a feed source, it must be pre-filtered from fine particles and chlorine before entering the RO system. Well water may contain hardness, iron, manganese, silica, or hydrogen sulfide — all of which can quickly damage the membrane. Some of these issues can be addressed by using an antiscalant.
We recommend performing a detailed laboratory analysis of your well water. For tailored advice, feel free to contact us at [email protected].
-
What is the best way to remove hardness before reverse osmosis?
Removing hardness salts before the reverse osmosis system is the most effective solution. This can be done by using a softener.
If your feed water is more complex and contains not only hardness but also iron, manganese, or TOC, we recommend using Ecomix® filtration media.
Antiscalants can also be used effectively in industrial systems with a capacity of more than 2.0 m³/h.
-
Which type of tank is better to install after the system?
An open tank is the most common solution, especially if the required water flow exceeds the system capacity by three times or more. It is commonly used in private houses and car washes.
A pressure tank is suitable when the required water flow is short-term and does not exceed twice the system’s hourly capacity. It is typically used in restaurants and cafés.
-
Can I connect multiple tanks after the system?
Yes, it is possible to connect two or more tanks to a single system.
If you have such a need, contact us at [email protected], and we will recommend the best solution.
We also suggest considering a ready-made option for this purpose — the Ecosoft Smart Water Keeper 500 L water tank.
-
What are the advantages of the Grundfos pump in this system?
The Grundfos pump used in this model offers several advantages:
- low energy consumption (0.67 kW)
- low noise level (55 dB)
- built-in dry-run protection
- high operating pressure (up to 16 bar)
- global manufacturer’s warranty from Grundfos
Related products
Local support
Our partners are happy to support you with their expertise, ensuring a Professional installation and Easy Maintenance.
Just leave a short note and we will connect you with one of our local partners!
