Setting new standards for lab water quality





Reliably remove sand, rust, chlorine, or organic contaminants from your lab water.

Compact RO filters with great recovery rates to achieve type 3 water on-site in your lab.

Achieve lab water with a TDS level of up to 5 ppm thanks to our powerful ion exchange resin.
Why laboratories trust Ecosoft

Our services & support for labs

On-site service

Callback service

Email consultation
You’re interested in our solutions for your lab? Let’s talk!
-
What recovery rates do your RO filters have?
The recovery rates of our reverse osmosis filters differ from product to product, but are always at least 50%.
Our RObust 1500 direct flow reverse osmosis filter, for example, has a recovery rate of 60–65%, while its small brother, the RObust Mini direct flow reverse osmosis filter, has a recovery rate of 50%.We constantly work on enhancing the efficiency and therefore sustainability of our reverse osmosis filters and hope to improve recovery rates even more in the future.
-
Which TDS levels are required for labs?
The Total Dissolved Solid (TDS) level required for your lab depends on the kind of work you do. The higher the TDS level, the more organic and inorganic matter is dissolved in the water, which can interfere with procedures, measurements and experiments.
General lab work usually requires a TDS level of 10 ppm or lower, while more analytical testing ideally has a TDS level of 5 ppm or lower. Very sensitive tasks such as the work with cell cultures requires an even cleaner environment with TDS levels of 1 ppm or lower.
Please keep in mind that the exact rules regarding TDS levels for certain tasks are clearly defined, usually by a local authority. Make sure to follow the standards laid out by the relevant body for your lab work.
-
Do I need to use the tank with these systems?
We recommend using a tank whenever you connect one of our reverse osmosis filters to an additional device to average out TDS levels and achieve consistent results.
-
What TDS is required for the inlet water?
The required TDS level of the inlet water depends on the filter you use. All our RObust reverse osmosis filters require a TDS level of 1,000 ppm or less.
-
Can I achieve type 1, 2, and 3 purity with your products?
It is possible to achieve type 3 purity with Ecosoft products alone by combining for example the reverse osmosis filter RObust 1500 with a demineralisation cartridge.
This water with type 3 purity is ideal for autoclaves, ultrasonic scalers, rinsing dishes and preparing laboratory solutions.
Unfortunately, achieving type 1 and 2 purity isn’t possible with Ecosoft products alone at the moment – our reverse osmosis filters, however, can be a vital part of the purification system in your lab.