Product information
The replacement filter cartridge for CROSS RAY countertop reverse osmosis filter is designed to maintain stable purification performance and consistently high water quality. Its integrated 3-in-1 design combines sediment filtration, carbon block filtration, and an RO membrane to reduce sediment, chlorine, dissolved impurities, unwanted taste, and odor.
The cartridge helps provide clean and great-tasting water for everyday use. Its lifespan is up to 12 months or 2 000 L, while the twist-lock design allows quick and easy replacement without tools.
Technical information
Smart maintenance
The built-in indicator reminds you when it is time to replace the filter, helping maintain stable purification performance.
Filter replacement
The CROSS RAY replacement filter (CSV175BHAECO) reduces sediment, chlorine, and dissolved impurities to deliver clean and great-tasting water.
Filter lifespan: up to 2 000 L
Recommended replacement cycle: up to 12 months
Actual filter lifespan may vary depending on water quality and usage conditions.
Filter replacement procedure
- Open the tank lid and remove the raw water tank.
- Remove the used filter cartridge and install a new one securely.
- Fill the tank with tap water.
- Reinstall the tank and close the lid tightly.
Warning! If the lid is not closed properly, the device will not start.
- Connect the power supply cord to the electricity supply. The device will automatically switch to water production mode. This takes approximately 10 minutes.
- Drain the first portion of water, as it may be turbid, and refill the tank with tap water.
- Start the flushing cycle:
- Activate flushing after replacing the cartridge.
- The process takes about 20 minutes and cleans the filters and pipes.
- Follow the device prompts and replace the water when requested.
Warning! Do not use drinking water while flushing the filter.
- After flushing is complete, produce approximately 1 L of room-temperature water, then produce 1 L of water at 100 °C.
- Make sure the system is operating stably.
- Press and hold the Filter Reset button for 5 seconds.
Daily use
- Before filtering again, always drain the remaining water from the tank after the previous filtration.
- Do not drink water that has not been used for more than 48 hours.
- Clean the water tank and drip tray regularly.
