Ecosoft AQUABOX 150 A reverse osmosis water vending machine

The Ecosoft AQUABOX 150 A is a water vending machine designed to purify mains water to bottled-water quality, compliant with Directive 2020/2184/EU, and automatically dispense it into consumers' bottles.

It includes multiple purification stages: mechanical filtration, activated carbon filtration, reverse osmosis membrane separation, remineralisation, additional carbon filtration for taste improvement, and UV disinfection.

Water purification involves several stages: mechanical filtration to remove suspended particles, activated carbon to eliminate chlorine, antiscalant to prevent scaling on membranes, high-pressure reverse osmosis to reduce salts, microorganisms, and bacteria, remineralisation to adjust mineral content, post-carbon filtration for improved taste and odour, and UV disinfection.

Purified water is stored in a pressure tank before dispensing.

The standard configuration includes a QR code reader for contactless payments.

Optional features include a bill acceptor, coin acceptor, and POS terminal allowing payments by cash, coins, or card, depending on the installed options.

Yes. The purified water meets bottled water standards under Directive 2020/2184/EU and Ukraine’s sanitary-epidemiological requirements (Report No. 602-123-20-1/3637).

It undergoes rigorous treatment — including filtration, membrane separation, remineralisation, and UV disinfection — to remove impurities, chlorine, salts, bacteria, and microorganisms.

Replacement intervals depend on usage and source water quality:

• Mechanical pre-filter: every 3 months or after 60 m³
• Carbon pre-filter: every 3 months or after 50–60 m³
• Antiscalant cartridge: after 40 m³
• Membrane elements: every 12 months or after 60 m³
• Remineralisation & post-carbon cartridges: every 3 months or after 40 m³
• UV lamp: every 6 years

It’s also recommended to monitor pressure drops and water quality monthly.

The machine should be installed indoors, in a ventilated area, with:

• Inlet water pressure: 1.5–4 bar
• Temperature: 15 ± 5 °C
• Water quality within set limits (e.g. TDS < 1,000 ppm, hardness < 500 ppm CaCO₃)

Required connections:

• ½" inlet and drain
• 230 VAC power supply (max. 0.6 kW)
• Access to a sewer line

Before operation, ensure proper installation, set up the controller, and verify input conditions. Professional setup is strongly recommended to avoid issues.