Standard PRO and PURE are reverse osmosis filters designed to provide clean, safe, and great-tasting drinking water at home. While both deliver high-quality water, they differ in mineralization technology and performance.

Standard PRO is a classic RO system that reliably provides purified water for everyday use. These models offer basic mineralization at a level of 20–30 mg/L, making them a simple and effective solution for users looking for a safe and affordable home filtration system. The system uses an Ecosoft 50 GPD membrane, a standard pre-filter set, and fills the tank in about 90 minutes.

PURE filters are designed for those who want consistently delicious water enriched with calcium and magnesium. With advanced mineralization technology, PURE systems maintain a stable mineral content of 60–80 mg/L in every glass. They also feature a water-saving function that reduces wastewater by up to 20,000 L per year. Thanks to a more efficient 75 GPD membrane and improved pre-filters, the tank is filled in just 60 minutes.

For stable operation, the system requires water supply pressure of at least 3 bar. If the RO filter is installed in another room, such as a pantry, basement, or technical room, the distance and lifting height may slightly reduce the pressure.

If the inlet pressure is below 3 bar or the water needs to be supplied to a second floor, choose a model with a pump or install a pump separately. For a comfortable flow rate from the faucet, place the storage tank as close to the faucet as possible.

Yes. Most modern designer 3-in-1 faucets with hot, cold, and filtered water connections are compatible with standard reverse osmosis systems.

The RO system uses a standard 1/4″ tube connection. Many designer faucets already include an adaptor for a standard RO tube. If the adaptor is not included with the faucet, a standard fitting adaptor can be used, for example John Guest 1/4″ to 1/2″ or 3/8″ thread.

Make sure the faucet is designed specifically for drinking water and has a separate internal channel and outlet. This prevents purified water from mixing with tap water.

The standard power adaptor cable length for systems with a pump is 1.0–1.1 m.

If the socket is located farther from the installation point, we recommend planning a nearby power socket in advance or using a high-quality extension cable.

The booster pump usually operates within a noise range of 40–50 dB. This is comparable to a quiet conversation or a modern low-noise refrigerator.

Most noise does not come from the motor itself, but from vibration if the pump touches cabinet walls or rigid pipes. Using rubber dampers or anti-vibration feet can significantly reduce this noise.